Canon opture 10 Instruction Manual page 151

Recording
Problem
Cause
Solution OJ
Image will not appear Camcorder is not set to Set the camcorder to
28
on the screen.
CAMERA mode. CAMERA mode.
"Set the time zone, date Time zone, date and time Set the time zone, date and 25
and time" appears on
are not set, or the backup
time, or replace the backup
the screen. battery is exhausted. battery and reset the date
and time.
Pressing the start/stop Camcorder is turned off. Turn on the power.
28
button will not start
Cassette is not loaded. Load a cassette. 22
recording.
Tape reached the end
(~ END
Rewind the tape or replace
22
flashes on the screen). the cassette.
Cassette is protected (~
Replace the tape or change
23
flashes on the screen). the position of the protect
switch.
Camcorder is set to a mode Set the camcorder to 28
other than the CAMERA mode. CAMERA mode.
Camcorder will not Autofocus does not work on Focus manually.
76
focus.
that subject.
Viewfinder is not adjusted. Adjust the viewfinder with
20
the diopter adjustment lever.
Lens is dirty. Clean the lens.
147
A vertical light bar Bright light in a dark scene
-
appears on the screen. may cause a vertical light
- - -
bar (smear) to appear. This is
not a malfunction.
Sound is distorted or When recording near loud
-
recorded in a lower sound (such as fireworks,
volume than the actual drums or concerts), sound
volume. may become distorted or
---
may not be recorded in the
actual sound level. This is
not a malfunction.
Viewfinder picture is Viewfinder is not adjusted. Adjust the viewfinder with
20
blurred. the diopter adjustment lever.
Playback
Pressing the playback Camcorder is turned off, or is Set the camcorder to PLAY
37
button does not start not set to PLAY (VCR) mode. (VCR) mode.
playback.
Cassette is not loaded. Load a cassette.
22
Tape reached the end
(I®I
END
Rewind the tape.
37
flashes on the screen).
Image will not appear [AV/PHONES] is set to Set [AV/PHONES] to [AV] in
70
on the TV screen. [PHONESO] in the menu.
the menu.
[AV
--+
DV OUT] is set to
Set [AV
--+
DV OUT] to [OFF].
94
[ON].
Tape is running, but TVNIDEO selector on the TV Set the selector to VIDEO.
40
image will not appear is not set to VIDEO.
on the TV screen.
Video heads are dirty.
Clean the video heads.
148
You attempted to play back Stop playback/dubbing.
92
or dub copyright protected
tape.
No sound from the built- Speaker volume is turned Adjust the volume with the
39
in speaker.
off. selector dial.
-
§ :~
o
Q.
3
a:
lI.I
0
t+
::l
_. lI.I
o -
::l
151