Canon opture 10 Instruction Manual page 106

3. Press the PHOTO button fully.
• 0 disappears and you hear a shutter sound.
• The card access indicator flashes and the card access display
appears.
• The still image shown on the screen will be recorded on the memory card.
a
To use the self-timer ([lJ 68), press the
~
(self-timer) button before step 2
and press the PHOTO button fully.
a
If the subject is not suitable for autofocus, the focusing frame turns yellow and
locks the focus. The confirmation sound beeps once. Adjust the focus manually
with the focus ring.
o
The focusing frame gives an indication of the focusing point. Depending on the
size of the subject or the distance, the camcorder may focus outside the frame.
o
When the subject is too bright (overexposed), "OVEREXP" starts flashing. If
you have turned off the built-in ND filter, we recommend changing the setting
back to AUTO. Open the menu and select [CAMERA SET UP]. Select [ND
FILTER], set it to [AUTO] and close the menu.
o
"OVEREXP" does not appear when you press the EXP button.
1. Set the camcorder to CARD CAMERA mode.
A white focusing frame appears in the center of the screen.
2. Set the program selector to
reJ.
3. Turn the selector dial to display all focusing frames.
- Three focusing frames appear on the screen, one of it in green.
"'C
~
U
~
o
E
cv
~ 4. Turn the selector dial to select the focusing point.
g'
Turn the selector dial up to select the frame to the right, down
"iii
::J
to select the frame to the left.
5. Record the still image.
FINE
[gSO
I I
L.J
FINE
[gSO
I 1 I 1 I 1
L.J L.J L.J
FINE
[gSO
ri
L.J
_ a
If you operate the zoom lever, press the EXP button or do not press the PHOTO
~
button within 4 seconds, the frames other than the selected one disappear.
106