Recording from Digital Video
Devices (DV Dubbing)
You can record from other digital video devices equipped with a DV terminal with
virtually no loss in picture and sound quality.
H
a
When recording from digital video devices, make sure that" AV .. DV" is not
displayed on the screen. If "AV .. DV" is displayed, change the setting
(QJ 94).
a
Anomalous signals sent from the connected device may be recorded as
anomalous picture (although it may not appear so on the screen), or it may not
be recorded at all.
a
Copyright protected signals cannot be recorded.
a
Blank sections may be recorded as anomalous picture.
a
If the picture does not appear, reconnect the DV cable or turn the camcorder
off and back on again.
a
You can connect only one device with the DV cable.
a
You can use the camcorder for playback and recording without reconnecting
the DV cable.
m
C.
;::+
:i"
I,Q
-
7. Press the. button to stop recording.
• Press the
~!l1
button to pause recording.
• Press the
~!l1
button again to restart recording.
8. Connected Device: Stop playback.
1. Connect the camcorder to the digital video device.
See
Connecting
a
Digital Video Device (QJ
89).
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
"DV IN" appears.
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the
picture on the screen.
S. Connected Device: Play back the tape.
6. Press the
"-'11
button when the scene you wish to
record appears.
91