Canon opture 10 Instruction Manual page 274

SeluphasfinishedinslallingDVNETWDRKSOLUTIONDISK
on your computer
8.
Click [Finish].
• The installation is complete.
A
Installation Precautions:
• Install the driver files from the DV NETWORK SOLUTION DISK first before installing
the driver (OJ 10).
• Close any programs that are running before installing the driver.
• Do 'not turn off the camcorder until the driver installation is complete. And do not
interrupt the installation.
• Users of Windows XP Professional must first log in as an Administrator to install
programs.
1.
2.
3.
4.
5.
'12
Start the computer.
$$$$$$$$$$$$$$$$$$$$$$@$$$@$$@$$@$$$$$$$$$@$$$$$$$$$@$$@$$$$$$@$$@$$$$$$O$$@$$GO$lIiIO$lIiIO$$O$$lIiIO
Connect the power adapter to the camcorder.
$ 0 0 $ 0 $ $@ 0 OllilO $$ $ 0 $ $ $ $@ 0 $$ 0 0 $@OOllilOO$ 0 0 $ $ $ $ G $ 0 III 0 $ $ 0 $ $ $ 0 0 G $ 0 III 0 0 $ $ $ $ III 0 $lIiI $ 0 $ 0 $ $ G $ 0 III 0 $ $ $ $ $ $ $ $.$0 $ $0 0 $
Set the camcorder to CARD PLAY (VCR) mode.
Connect the camcorder to the,computer using the DV cable
(C022).
• The driver installation starts automatically.
• Depending on the setting of your computer, a video editing program may
start. In such case, close this program.
• If the installation is complete, the [Scanner and Camera Wizard] or a dialog
for selecting an application appears. Click [Cancel] to close the dialog.
Restart t,he computer.