General Specifications; Printer Basic Specifications - SATO DR308e Operator's Manual

GENERAL SPECIFICATIONS

6.1 PRINTER BASIC SPECIFICATIONS

PHYSICAL CHARACTERISTICS
Width
Height
Depth
Weight
ENVIRONMENTAL (EXCLUDING MEDIA)
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
POWER SUPPLY
Input Voltage
Power Consumption
PROCESSING
CPU
Flash ROM
PRINTER LANGUAGE
Standard
INTERFACES
Interface Board
Optional communication inter-
face boards
DR308e Operator's Manual
5° to 40°C (41 to 104 F)
-5° to 60°C (23 to 140 F)
30 to 80% RH, Non-condensing
30 to 90% RH, Non-condensing
Input power voltage: 100-240 V AC, +/-10%, 50/60 Hz (Full range)
Rated Input voltage: 100-240 V (Full range)
At peak times: 104 Watts
In standby: 24 Watts (average)
SATO Barcode Printer Language (SBPL)
Communication Interface (1 slot)
External connector (for optional devices)
RS-232C D-sub 9-pin type (for simple input device (keypad) only)
1) RS-232C (High-Speed) I/F board
2) IEEE1284 (ECP/Compatible) I/F board
3) LAN I/F board or
4) USB I/F board (Full-Speed)
Section 6: Gerneral Specifications
211 mm (8.3 in.)
240 mm (9.4 in.)
350mm (13.8 in.)
8 Kg (17.6 lbs.)
32 Bit RISC
8 Megabytes
Page 6-1