Printer Setting Modes; Paper (Media) Mode - SATO DR308e Operator's Manual

Section 3: Operation and Configuration

3.4 PRINTER SETTING MODES

There are five selection for the printer setting mode.
1.
When the printer is OFFLINE, press the FEED button while pressing the LINE button.
PAPER MODE is first displayed.
2.
Press the LINE button repeatedly will switch to different mode cyclically as shown.
3.
When the desired mode is displayed, press FEED button to enter to the mode.

3.5 PAPER (MEDIA) MODE

Paper mode is to select the media used and enable the appropriate sensor.
When LABEL
is selected
1.
When PAPER MODE is displayed, press the FEED button to set the media used.
2.
Press the LINE button to select either TAG or LABEL is used. Then, press FEED button to enter the selec-
tion.
3.
When LABEL is used, press LINE button to specified the types of label used. Select either GAP or I-MARK
label. Press FEED to activate the selection.
When TAG is used, press LINE to specific the types of tag used. Select CENTER (Gap) hole, SIDE (Gap)
hole or I-MARK tag, and press FEED button to activate the selection.
Printer returned to OFFLINE mode after setting.
Page 3-6
While pressing LINE button,
press FEED button
LINE
LINE
FEED
Enters to
selected mode.
FEED
FEED
FEED
OFFLINE mode
Mode selection
LINE
LINE
When TAG is
selected
LINE
FEED
LINE
LINE
DR308e Operator's Manual