Adjustments; Footbow - Invacare XLT Dynamic Manual

It is important to adjust the footbow, footrests, legrests, footplates and calf pads to obtain a good seating posi-
tion
A
Tools: 4 mm Allen Key
10 mm fixed spanner
Tools: 5 mm Allen Key
C
12

Adjustments

FOOTBOW

Height adjustment, footbow
Loosen the screws (A) using an Allen key, remove
them, and adjust the footbow to the correct height.
Retighten the screws and adjust the calf-strap.
High mounted footbow
Loosen the screws (B) using an Allen key and adjust
the clamp and footbow to a suitable height. Retighten
the screws and adjust the calf-strap.
B
Footbow XLT Max
Loosen the screws (C) using an Allen key and adjust
the footbow to a suitable height using one of six
holes on the footbow tube. Retighten the screws and
adjust the calf-strap. Make sure that the screws do not
protrude out of the casing.
Tools: 5 mm Allen Key
Important
The distance between the lowest part of the
footrest and the floor or ground must be at
least 40 mm.
Warning!
Risk of injury
The footbow can fall out if the screws are not
tightened properly. Make sure that both screws
are positioned in the holes on the tube.
Important
The distance between the lowest part of the
footrest and the floor or ground must be at
least 40 mm.
®
INVACARE XLT