Restraint Methods - Invacare XLT Dynamic Manual

B
A
44

RESTRAINT METHODS

A. Front restraints with straps
1. Connect the front straps around the front tube
of the frame, just above the castor housing, see
picture A.
2. Release brakes and tension front straps by pulling
the wheelchair backwards.
3. Re-apply wheelchair brakes.
B. Rear restraints
C 1. Attach the snap hooks of the rear straps around the
rear tube of the frame, just above the rear wheel
attachment, see picture B.
2. Tighten the straps.
C. Pelvic belt and 3-point safety belt
1. Check that the pelvic belt is correctly attached
to the wheelchair, adjust the length and fasten it
around the user.
2. Fasten the 3-point safety belt around the user.
®
INVACARE XLT