Calf Pads/ Footplates; Footrests One-Piece - Invacare XLT Dynamic Manual

Tools: 5 mm Allen Key
Tools: 5 mm Allen Key
1.
Tools: 4 mm Allen Key
10 mm fixed spanner
2.
14

CALF PADS/ FOOTPLATES

C
D
B
A

FOOTRESTS ONE-PIECE

A
Calf pads
The calf pads can be fitted in two different depth
positions. Swing the pad forwards. Unscrew screw
(B) using an Allen key. Remove the large nut (C) on
the reverse side and place it in the other attachment
hole. Move the calf pad to the new position and secure
it into place with the screw.
The height of the calf pads can easily be adjusted using
the handwheel (D).
Depth- and angle adjustable footplates
Adjust the angle and the depth by loosening the
screw (A) at the footplate attachment with a
5mm Allen key. Adjust the footplate to the correct
position and retighten the screw.
Do not place anything on the footplate when
the screws have been loosened.
1. Footrest, one piece
Adjust the angle by loosening the four screws (A)
on the footplate attachment with a 4 mm Allen
key. Adjust the footplate to the correct position
and retighten the screws.
Do not place anything on the footplate when
the screws have been loosened.
2. The footrest can be flipped up. Lift the right side
of the footrest upwards.
Be careful not to trap your fingers between
the footrest and the receiver when you fold
down the footrest.
®
INVACARE XLT