Backrest - Invacare XLT Dynamic Manual

1.
XLT Max
2.
3.
4.
Tools:
4 mm Allen Key
10 mm fixed spanner
16

BACKREST

Angle adjustment
1. The backrest can be mounted in two different
positions, each with the possibility to change the
angle of the backrest. The angle is infinitely variable
by ± 10 degrees.
The backrest tube has an 8 degree bend towards
the back.
2. If you want to tilt the backrest forwards, position
the eccentric plate in the position furthest back
(as in the illustration). You can then adjust the tilt
of the backrest to maximum –10°.
3. If you want to tilt the backrest backwards, posi-
tion the eccentric plate in the position furthest
to the front. You can then adjust the angle to
maximum +10°.
4 Move the eccentric plate by loosening the socket
cap screw on the plate. Hold the inner nut firmly
in place using a 10 mm fixed spanner. Remove the
plate, push the backrest to the desired angle, move
the plate forwards or backwards and mount it in
that position. Hold the nut steady from the inside,
and retighten the socket cap screw with the Allen
key.
®
INVACARE XLT