Seat Adjustments; Adjusting The Seat Depth; Width Adjustment Seat - Invacare Rea Azalea Series User Manual

4.9 Seat adjustments

The seat depth of the chair can easily be adjusted to provide good
support. The width between the legrests and armrests and the height
of the armrests can also be adjusted.
The seat cushion A is secured with Velcro® strips B on
the seat plate.

4.9.1 Adjusting the seat depth

A
1. Remove the seat cushion.
Loosen the screws A with an Allen key.
2.
3. Move the front edge of the seat forwards or backwards.
Re-tighten the screws A.
4.
5. Put the seat cushion back.
The distance between the back of the knee/calf and the
cushion should be as small as possible, but without contact.

4.9.2 Width adjustment seat

A
1488727-G
A
B
Loosen the screw A with an Allen key.
1.
Tools: 5 mm Allen Key
2. Adjust the armrests to the desired width.
3. Re-tighten the screw A.
Risk of poor adjustment
– There must not be any pressure on the armrest /
legrest while adjusting the screw.
Width adjustment legrest
Loosen the screws B.
1.
Tools: 5 mm Allen Key
2. Adjust the legrests to the desired width.
3. Re-tighten the screws.
Side rest pad
There are two different side rest pads available, one side rest cushion
which is placed in the armrest pocket and one side rest pad which is
placed directly on the side rest.
A
B
The seat width can be decreased with 2x20 mm either by
placing side rest cushions A inside the armrest pocket B or
by using the side rest pad C + D.
Components
17