Programmable Keys - Samsung iDCS 500 General Description Manual

Digital communications system
Hide thumbs Also See for iDCS 500:
Table of Contents

Advertisement

OFF-HOOK VOICE ANNOUNCE (STANDARD)
Keysets may receive a voice announcement while on another call. The calling sta-
tion must have an OHVA key. When transferring a call to a busy keyset or while
listening to busy signal, the station user can press the OHVA key to make an OHVA
call to the busy keyset. If the called keyset is in the DND mode, it cannot receive
OHVA calls. The L version of software has an user programmable option that will
allow the OHVA to be heard through the speaker rather than in the handset.
ONE TIME DO NOT DISTURB
The Do Not Disturb (One Time) feature is used to stop all calls to a station when the
user is on an outside line and does not want to be disturbed for the duration of the
call. Upon completion of the call, DND is canceled and the station is returned to
normal service. This feature requires a programmed button.
ONE TOUCH DIALING KEYS
Frequently used speed numbers can be assigned to one touch dialing keys for
fast accurate dialing.
ON-HOOK DIALING
Any keyset user can originate calls without lifting the handset. When the called
party answers, the user may speak into the microphone or lift the handset for more
privacy.
PRIVACY RELEASE
This feature will allow another station to join in on your conversation by temporarily
releasing privacy on the C.O. line from your keyset.
Requires a Privacy Release key to be programmed on your keyset. A maximum of
three (3) other people can join in. This uses one of the conference circuits in the
system.

PROGRAMMABLE KEYS

LCD 24B and STD 24B keysets have 24 programmable keys, LCD 12B and Basic
12B keysets have 12, and 7B keysets have 12. Each key can be programmed for
more than 25 different uses to personalize each phone. Examples of keys include
individual outside line, individual station, group of lines, group of stations and one
touch speed dial buttons. Using these keys eliminates dialing access codes.
The following feature keys have extenders that make them more specific: SPEED
DIAL, SUPERVISOR, PAGE, DSS, DIRECTED PICKUP , GROUP PICKUP , DOOR
PHONE, BOSS, PROGRAMMED MESSAGE, IN AND OUT OF GROUP , FORWARD
and VOICE MAIL TRANSFER. The extender can be a station, a group or another
identifying number.
(iDCS 500-L version software only)
4.36

Advertisement

Table of Contents
loading

Table of Contents