Samsung iDCS 500 General Description Manual page 57

PARK ORBITS
The system has 10 park orbits (0–9). These orbits can be used to park calls prior to
paging and allows the call to be retrieved by dialing a park code plus the orbit
number. Calls parked in this manner can also be retrieved by dialing the park
pickup code (10) plus the station or trunk number. This feature is in addition to Call
Park and Page.
PRIME LINE SELECTION
Any station can be programmed to select a specific line, trunk group, telephone
number, station or station group when the handset is lifted or the speaker key is
pressed (same as Hot Line feature).
PRIVATE LINES
For private line use, stations can be prevented from dialing and/or answering any line.
PROGRAMMABLE LINE PRIVACY
Each outside line can be programmed to ignore the automatic line privacy. This
allows up to four other parties to join your conversation by simply pressing the line
button. This is similar to 1A2 key telephone operation.
PROGRAMMABLE TIMERS
There are over 50 programmable system timers to allow each installation to be
customized to best fit the end user's application.
RECALLS
Calls put on hold, transferred or camped-on to any station will recall to the originat-
ing station if not answered within a programmable time. A recall that goes unan-
swered for the duration of the attendant recall timer will recall to the system opera-
tor group. Hold, transfer, camp-on and attendant recalls have individual program-
mable timers. Calls recalling to buttons with tri-colored LEDs will flash amber.
REMOTE PROGRAMMING—PC
Remote programming allows the technician to access the system database from a
remote location for the purpose of making changes to the customer data. The mo-
dem card and a PC using an optional software package will be needed to imple-
ment this feature.
RING MODES
TIME BASED ROUTING –PLANS
Each C.O. line can be programmed to ring at any station or station group. Each
line can be assigned a ring destination based on six (6) different ring plans based
on time of day and the day of the week. The system operator (intercom dial "0")
can also be a different station group for each ring mode.
4.23