Options Menu; Windith Utility - Texas Instruments TravelMate 5000 Series User Reference Manual

Options Menu

When the Options button is selected, the Options Menu
appears. From this menu, you can select the display type
and mouse options you desire. More detailed information
is provided in online help. The following table depicts fields
to be defined in the Options menu:
Button
Current Displays the currently active display. From the Current
Display Display button, you may set Windows to run with any of the
following:
CRT - sends output to an external VGA monitor
Panel - sends output to the panel on the notebook
CRT/Panel - sends output to both panel and CRT
NOTE: If there is no CRT attached, the CRT and CRT/Panel
selections will not be available choices.
Options Lets you change mouse options. From this selection, you
may set the mouse as follows:
Mouse Trails - enables mouse trails exactly as if selected
from the Mouse section of the Control Panel.
Change Res. - sets Windows to run at the exact
resolution of the flat internal LCD panel when in Panel or
CRT/Panel modes. When in CRT only mode, Windows
runs at the resolution selected in the main screen of
WinMode.
Panning/Scrolling - runs Windows at the resolution
requested in the WinMode menu on all displays.

WinDith Utility

Your LCD panel generates 4,096 colors, however some
software requires as many as 65,000 colors. When this
occurs, you may note that some shades generated by your
software are replaced with black areas that produce uneven
shading (as in the first figure below). When you turn the
WinDith utility on, the shading is smoothed out (as in the
second figure below).
System Utilities
Description
Custom Windows Utilities 3-11