Attaching 8-Mb Add-On Memory - Texas Instruments TravelMate 5000 Series User Reference Manual

Note: If all of the memory is not recognized at powerup, try
n
re-installing the memory board.

Attaching 8-MB Add-On Memory

These procedures are used if you are operating a TM5000
Series computer and have purchased the 8-MB Add-On
Memory option. The 8-MB Add-On Memory board can only
be installed if you have already purchased an 8-MB or
16-MB RAM expansion board. To attach the 8-MB Add-On
Memory board, complete the following steps:
1.
2.
3.
4.
Complete steps in Preparing a Unit for Installation earlier
in this document. If an expansion board already
resides in the unit, see Removing an Existing Memory
Expansion Board earlier in this document.
If your first optional memory board has not been
installed, remove it from its packaging.
Remove the 8-MB Add-On Memory board from its
packaging.
Turn the unit right side up on a padded surface.
RAM Expansion
TravelMate Options 9-21