Removing An Existing Memory Expansion Board; Installing 8- Or 16-Mb Boards - Texas Instruments TravelMate 5000 Series User Reference Manual

RAM Expansion
Removing an Existing
Memory Expansion Board
To remove an existing memory expansion board, pull the
board out of the slot by inserting a screwdriver in the hole
on the board and popping the board out of the unit.
Installing 8-MB or 16-MB Boards
To install 8-MB Add-On Memory, refer to Attaching 8-MB
Add-On Memory later in this document. To install the
8-MB or 16-MB optional memory expansion boards,
complete the following steps:
1.
2.
3.
9-18 TravelMate Options
Complete steps in Preparing a Unit for Installation earlier
in this document. If an expansion board already
resides in the unit, see Removing an Existing Memory
Expansion Board earlier in this document.
Remove the RAM expansion board from the plastic bag.
Turn the unit right side up on a padded surface.
Remove battery pack