Dos Installation - Texas Instruments TravelMate 5000 Series User Reference Manual

DOS Installation

These procedures are performed directly after the last step
of the previous section. To load DOS, complete the
following steps:
1. Insert DOS Installation Diskette #1 into the A: drive and
press Ctrl-Alt-Del.
The DOS Installation program loads and the Welcome
screen appears.
2. To continue Setup, press Enter.
You are prompted to format the drive.
3. Press Enter.
Your hard drive is formatted. A list of system settings
appears.
4. Follow instructions for editing the system settings.
Press Enter when settings are correct.
You are prompted for the directory into which DOS files
will be copied.
5. Keep the default directory that appears on the screen or
change it if you want and press Enter.
DOS files are copied into the directory. Follow the
prompts as you are asked to insert each DOS diskette.
When all files have been copied, you are prompted to
remove all floppy disks from the drives.
6. Press Enter.
You are prompted to restart your computer.
Restoring System Files
Installing and Using Applications 2-9