Pcmcia Installation - Texas Instruments TravelMate 5000 Series User Reference Manual

9.
10. Select Yes to restart Windows.

PCMCIA Installation

To install PCMCIA drivers from the DOS prompt, complete
the following steps:
Note: These drivers must be installed outside of the
n
Windows environment.
1.
2.
3.
4.
5.
If you are not using an external monitor or if your
changes have been made, select Ok.
You are told to restart Windows for changes to take
effect.
Modifications are made to your AUTOEXEC.BAT file that
reflect monitor configuration changes. Windows is
restarted and installation is complete.
Turn power off then on to your computer.
Insert the diskette labeled "Phoenix v3.xx".
At the DOS prompt, type A:\Install and press Enter.
An information screen appears.
Press any key to continue.
A screen appears describing your current system
controller board.
Press any key to continue.
You are asked to designate C:\PCM320 as the
destination directory.
Restoring System Files
Installing and Using Applications 2-13