Texas Instruments TravelMate 5000 Series User Reference Manual page 43

12. Select No and press Enter.
13. Select Yes.
14. Select COM4 for Communication Port and press Enter.
15. Select No.
16. Press Enter.
Note: If you receive a warning that DOSEMM386 was not
n
detected, press any key to continue. If you receive a
warning about battery operations or suspend operations,
press any key to continue.
17. To save PCMCIA configurations you just entered, select
You are asked if you want to use PCMCIA Modem/Fax
cards in your system.
You are prompted to select the COM port for your
modem/fax card.
You are asked if ATA type cards are going to be used.
The system automatically configures to the network card
installed.
You are prompted that Setup is complete. You can exit
without saving changes by selecting No.
Yes and press Enter.
Your are returned to the DOS prompt.
Restoring System Files
Installing and Using Applications 2-15