F9 Go Key - Texas Instruments TravelMate 5000 Series User Reference Manual

If you want to execute an
C causes
LFM
DOS Command: [
where you can type any
Enter to execute.

F9 Go Key

Pressing F9 at the
execute programs based on the file's extension. For
example, if you want to execute the
particular file, move the highlight to the
under the
DOS
how you have set up your
the F10
Setup Commands menu,
LFM
at the bottom of the screen
Press Esc to cancel, any other key to execute:
Press any key except Esc. Depending on how you have set
up your F10
LFM
prompt:
Parameters: [
At this prompt you can type the pathname of the file you
want to edit and press Enter (or, if you are executing
another type of file that requires no parameters, press
Enter to start execution). In the example, the
screen would appear.
When you exit the executable program,
displays its main menu.
LFM uses extended/expanded memory for itself when you
use the Go function, reserving all but about 8 KB for the
program. If no extended/expanded memory is available,
uses about 130 KB of standard base memory.
LFM
Function Key Commands
to prompt at the bottom of the screen
MS-DOS
main menu causes
LFM
directory listing and press F9. Depending on
LFM
Setup Commands menu,
command, pressing
MS-DOS
]
command and press
LFM
MS-DOS EDIT
EDIT.COM
Execute Commands item in
may prompt you
LFM
LFM
]
reloads and
LFM
Laptop File Manager 5-11
to load and
utility on a
line
then may
MS-DOS EDIT