System Files Recovery Diskette; Accessing Disk-Based Setup - Texas Instruments TravelMate 5000 Series User Reference Manual

Accessing the Setup Programs
If you are using the DiskMaker utility, run Windows and
double-click on the DiskMaker icon in the TravelMate
Notebook Center group. The number of diskettes required
to back up each area is indicated by the number of
selections on each tab page. Use these selections to
complete the system backup.
Note: If you don't want to use the backup process, you
n
may order operating system diskettes by referring to the
Backup Diskette Flier that came in the documentation set.

System Files Recovery Diskette

You are provided a System Files Recovery Diskette with
your computer. This is a bootable diskette with backup
software and enables you to restore minimum system files.
For further information, refer to Initial Startup Procedure
earlier in this chapter.

Accessing Disk-Based Setup

This Setup program, which resides on the hard disk under
the
user-selectable parameters. Disk-based Setup contains
four screens, or pages, with onscreen prompts plus a
context-sensitive online help.
To run this program, ensure that you have exited from the
Windows environment. From the
access Page 1 of disk-based Setup in two ways:
After Setup has loaded, you can define parameters based
on the information in the online help or in this chapter
1-6 Using the Setup Programs
directory, defines all default and most
UTILS
Press Fn-Esc (Setup)
Type SET_UP and press Enter
prompt, you can
C:\>
.