Deleting Secure Or Proof Jobs - Xerox DOCUPRINT N4525 Advanced Features And Troubleshooting Manual

The following example creates a PCL proof job with the name "Sample" associated with
password 7777 requesting five collated sets in addition to the proof copy.
<ESC>%-12345X@PJL XPROOFJOB
@PJL XJOBPASSWORD = 7777
@PJL JOB NAME = "Sample"
@PJL ENTER LANGUAGE = PCL
@PJL SET QTY = 5
...PCL file...
<ESC>%-012345X@PJL EOJ
<ESC>%-012345X.
The printer continues processing all data after the @PJL SET QTY = 5 command as part of
the proof job named "Sample." The proof job is stored on the hard disk under the name
"Sample" with a password of "7777" (as defined in the PJL XJOBPASSWORD command).
The @PJL EOJ command signifies the end of the proof job ends. The "EOJ" command
should be followed by a UEL.

Deleting secure or proof jobs

You use the Password Menu to print or delete secure or proof jobs.
1.
On the control panel, press the Menu keys (labeled 1 or 5) to scroll to the
Menu.
2.
Press the Item keys (labeled 2 or 6) to scroll to the password prompt.
3.
Use the number keys to enter the 4-digit password for the job(s) you want to print
completely.
4.
Press the Item keys (labeled 2 or 6) to select either
this password.
5. Press the Value keys (labeled 3 or 7) to select either
6.
Press the Enter key (labeled 4).
7.
Press the On Line key (labeled 0) to exit the menus.
Advanced Features and Troubleshooting Manual
Hard Disk Drive and Memory (DRAM and Flash ROM)
All Jobs
Print
Password
or a particular jobs with
or Delete.
59