Booklet Printing; Watermark And Overlay - Xerox DOCUPRINT N4525 Advanced Features And Troubleshooting Manual

Booklet Printing

This feature, accessible through the printer driver, makes it possible to print a document
in the form of a small booklet.
I
The printed images are reduced to one-half a page; with two page images on each side
of each sheet of paper. The page images are arranged as Pages 1 and N on Sheet 1/Side
1; Pages 2 and N-1 on Sheet 1/Side 2; Pages 3 and N-2 on Sheet 2/Side 1; and so on.
The output sheets are then folded and stapled following printing.
I The optional Duplex Module must be installed to make use of this feature. The
duplex "Print on Both Sides" option must be selected on the driver screen.
I
The booklet printing feature is available for any paper sizes that can be used for
duplex printing. (See table of supported paper sizes on page 12 of the User Guide.
I The booklet can have any number of page images. The printed output will contain
one fourth the number of sheets of paper (two page images per side per sheet).
I If the total number of page images is not an exact multiple of four, there will be one or
more blank page images on the last sheet.

Watermark and Overlay

The Watermark feature allows you to have the printed output contain background text
(independent of that provided by the printing application) across the first page or every
page of a document. The driver enables you to create a watermark by specifying the text,
its font, size, position on the page, and rotation angle. You can save the watermark for use
on any document. The Overlay feature is only available with the PCL 5e driver.
Advanced Features and Troubleshooting Manual
Advanced Features
39