Xerox DOCUPRINT N4525 Advanced Features And Troubleshooting Manual page 111

Error Description and corrective action
Paper Jam Clear the paper jam in Tray 5 of the 2,500 Sheet Feeder (see the Paper Jams
I
Clear Tray 5 section of the User Guide).
Please Wait An operation that takes time is proceeding.
Please wait until the operation finishes.
I
Power Saver On No print jobs have been received for the set period of time for the Power Saver,
so the printer has set itself to lower power mode.
As soon as it receives the next print job, the printer returns to regular power
I
mode.
Press Menu Appears when in the menu system and you selected the Password menu but
there are no secure or proof jobs in the job queue.
Press the Menu keys (labeled 1 or 5) to access another menu.
I
Press the On Line key (labeled 0) to exit the menu system.
I
Print Using The available paper size or type does not match what was requested and the
<size> <type> Value key (labeled 3 or 7) was pressed.
Use the Value keys to search the trays. When you find an available size and
I
type of paper that is acceptable, press the Enter key (labeled 4). Back out of
the menu to exit. If the paper size and type that was substituted is not
acceptable, load the requested paper size and type, and print the job again.
Processing... A job is being processed with the specified name.
<job name>
Processing... A Configuration Sheet is being printed.
Config Sheet
Processing... A Demo Page is being printed.
DEMO
Processing... The Hard Drive directory report is being created.
Disk Directory
Processing... The Envelope Feeder is being used.
Envelope Feeder
Processing... The printer is generating and printing a fault history log.
Fault History
Processing... The Flash Directory report is being created.
Flash Directory
Processing... The MBF is being used.
MBF
Processing... A list of the control panel menu structure is being printed.
Menu Map
Processing... A PCL Font List is being printed.
PCL Font List
Processing... A PostScript font list is being printed.
PostScript
Processing... A Test Page is being printed.
TEST
Processing... The specified tray is being used.
Tray n
Advanced Features and Troubleshooting Manual
Control Panel Messages
95