Xerox DOCUPRINT N4525 Advanced Features And Troubleshooting Manual page 33

PCL Menu Items (cont'd.)
Orientation Sets the default orientation used in PCL.
Values:
Form Length Sets the default number of lines per page used in PCL. This value is linked to
paper size. Whenever the paper size is changed, the Form Length is
recalculated using the formula:
Values:
set as the
Note: The form length changes incrementally by 1 each time you press either
the Value key (labeled 3 or 7). To scroll quickly through the values, hold
down either key.
Line Terminat. Causes an additional carriage return after every Line Feed that appears in the
PCL text (<LF>=<CR><LF> line termination mode).
Values:
Advanced Features and Troubleshooting Manual
(default)
Portrait
Landscape
Form Length = ((logical page length in inches - 1 inch) * 6)
- (default is
005 128 60
's
System Menu Defaults
Off (default)
On
when inches is set and
64
value.)
Control Panel Menus
when millimeters is
17