Add/Edit A Vlan Group - ZyXEL Communications VMG5313-B30A User Manual

The following table describes the fields in this screen.
Table 70 Network Setting > Vlan Group
LABEL
Add New Vlan
Group
#
Group Name
VLAN ID
Interfaces
Modify

13.2.1 Add/Edit a VLAN Group

Click the Add New VLAN Group button in the Vlan Group screen to open the following screen.
Use this screen to create a new VLAN group.
Add/Edit
Figure 94
The following table describes the fields in this screen.
Table 71 Interface Group Configuration
LABEL
VLAN Group
Name
VLAN ID
LAN
Apply
Cancel
Chapter 13 Vlan Group
DESCRIPTION
Click this button to create a new VLAN group.
This is the index number of the VLAN group.
This shows the descriptive name of the VLAN group.
This shows the unique ID number that identifies the VLAN group.
This shows the LAN ports included in the VLAN group and if traffic leaving the port will be
tagged with the VLAN ID.
Click the Edit icon to change an existing VLAN group setting or click the Delete icon to
remove the VLAN group.
VLAN Group
DESCRIPTION
Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
Enter a unique ID number, from 1 to 4,094, to identify this VLAN group. Outgoing traffic is
tagged with this ID if Txtagging is selected below.
If LAN port 4 is configured as a WAN port, it will not display here.
Select Include to add the associated LAN interface to this VLAN group.
Select Txtagging to tag outgoing traffic from the associated LAN port with the VLAN ID
number entered above.
Click Apply to save your changes back to the VMG.
Click Cancel to exit this screen without saving.
VMG5313-B10A/-B30A Series User's Guide
204