Wds Scan; The Others Screen - ZyXEL Communications VMG5313-B30A User Manual

7.7.1 WDS Scan

You can click the Scan icon in Wireless > WDS to have the VMG automatically search and display
the available APs within range. Select an AP and click Apply to have the VMG establish a wireless
link with the selected wireless device.
Figure 38 WDS: Scan
The following table describes the labels in this screen.
Table 26 WDS: Scan
LABEL
Wireless Bridge Scan Setup
Refresh
#
SSID
BSSID
Apply
Cancel

7.8 The Others Screen

Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Others. The screen appears as shown.
See Section 7.10.2 on page 127
Chapter 7 Wireless
DESCRIPTION
Click Refresh to update the table.
This is the index number of the entry.
This shows the SSID of the available wireless device within range.
This shows the MAC address of the available wireless device within range.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
for detailed definitions of the terms listed in this screen.
VMG5313-B10A/-B30A Series User's Guide
122