Figure 90 DNS Entry: Add/Edit
The following table describes the labels in this screen.
Table 68 DNS Entry: Add/Edit
LABEL
Host Name
IP Address
Apply
Cancel
12.3 The Dynamic DNS Screen
Use this screen to change your VMG's DDNS. Click Network Setting > DNS > Dynamic DNS. The
screen appears as shown.
Figure 91 Network Setting > DNS > Dynamic DNS
The following table describes the fields in this screen.
Table 69 Network Setting > DNS > > Dynamic DNS
LABEL
Dynamic DNS Setup
Dynamic DNS
Chapter 12 Dynamic DNS Setup
DESCRIPTION
Enter the host name of the DNS entry.
Enter the IP address of the DNS entry.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Select Enable to use dynamic DNS.
VMG5313-B10A/-B30A Series User's Guide
201