ZyXEL Communications VMG5313-B30A User Manual page 270

Table 109 VoIP > SIP > SIP Account > Add new accoun/Edit (continued)
LABEL DESCRIPTION
Send Caller ID Select this if you want to send identification when you make VoIP phone calls.
Clear this if you do not want to send identification.
Enable Call Select this to enable call transfer on the VMG. This allows you to transfer an
Transfer incoming call (that you have answered) to another phone.
Enable Call Select this to enable call waiting on the VMG. This allows you to place a call on
Waiting hold while you answer another incoming call on the same telephone number.
Call Waiting Specify a time of seconds that the VMG waits before rejecting the second call if
Reject Timer you do not answer it.
Enable Select this if you want the VMG to forward all incoming calls to the specified
Unconditional phone number.
Forward
Specify the phone number in the To Number field on the right.
Enable Busy Select this if you want the VMG to forward incoming calls to the specified phone
Forward number if the phone port is busy.
Specify the phone number in the To Number field on the right.
If you have call waiting, the incoming call is forwarded to the specified phone
number if you reject or ignore the second incoming call.
Enable No Answer Select this if you want the VMG to forward incoming calls to the specified phone
Forward number if the call is unanswered. (See No Answer Time.)
Specify the phone number in the To Number field on the right.
No Answer Time This field is used by the Active No Answer Forward feature.
Enter the number of seconds the VMG should wait for you to answer an incoming
call before it considers the call is unanswered.
Enable Do Not Select this to set your phone to not ring when someone calls you.
Disturb
Enable Select this if you do not want the phone to ring when someone tries to call you
Anonymous Call with caller ID deactivated.
Block
Enable Call When you make a phone call but hear a busy tone, Call Completion on Busy
Completion on Subscriber (CCBS) allows you to enable auto-callback by pressing 5 and hanging
Busy Subscriber up the phone. The VMG then tries to call that phone number every minute since
(CCBS) after you hang up the phone. When the called party becomes available within the
CCBS timeout period (60 minutes by default), both phones ring.
• If the called party's phone rings because of CCBS but no one answers the
phone after 180 seconds, you will hear a busy tone. You can enable CCBS on
the called number again.
• If you manually call the number on which you have enabled CCBS before the
CCBS timeout period expires, the VMG disables CCBS on the called number.
• If you call a second number before the first called number's CCBS timeout
period expires, the VMG stops calling the first number until you finish the
second call.
Select this option to activate CCBS on the VMG.
MWI (Message Select this if you want to hear a waiting (beeping) dial tone on your phone when
Waiting you have at least one voice message. Your VoIP service provider must support
Indication) this feature.
Expiration Time Keep the default value for this field, unless your VoIP service provider tells you to
change it. Enter the number of seconds the SIP server should provide the
message waiting service each time the VMG subscribes to the service. Before
this time passes, the VMG automatically subscribes again.
Hot Line / Warm Select this to enable the hot line or warm line feature on the VMG.
Line Enable
Chapter 23 Voice
VMG5313-B10A/-B30A Series User's Guide
270