Maintenance; Stainless Steel Exterior; Storage Bin And Scoop - Hoshizaki KMD-410MAH Instruction Manual

9) Move the service switch to the "DRAIN" position.
10) Replace the front panel in its correct position and turn on the power supply for 2
minutes.
11) Turn off the power supply.
12) Remove the front panel.
13) Repeat steps 18 through 31 in "1. Cleaning Procedure" two times to rinse thoroughly.
14) Move the control switch to the "ICE" position.
15) Replace the front panel in its correct position.
16) Clean the storage bin/dispenser unit liner using a neutral cleaner. Rinse thoroughly
after cleaning.
17) Turn on the power supply to start the automatic icemaking process.
B. Maintenance
This icemaker must be maintained individually, referring to the instruction
manual and labels provided with the icemaker.

1. Stainless Steel Exterior

To prevent corrosion, wipe the exterior occasionally with a clean, soft cloth. Use a damp
cloth containing a neutral cleaner to wipe off oil or dirt build up.

2. Storage Bin and Scoop

* Wash your hands before removing ice. Use the plastic scoop provided (bin accessory).
* The storage bin/dispenser unit is for ice use only. Do not store anything else in the
storage bin/dispenser unit.
* Clean the scoop and the storage bin/dispenser unit liner using a neutral cleaner. Rinse
thoroughly after cleaning.
IMPORTANT
19