Maintenance - Hoshizaki F-1002MAJ-SC Instruction Manual

III. Maintenance
The appliance must be maintained in accordance with the instruction manual and labels
provided. Consult with your local Hoshizaki Certified Service Representative about
maintenance service. To obtain the name and phone number of your local Hoshizaki
Certified Service Representative, visit www.hoshizaki.com.
• Only qualified service technicians should service the appliance.
• To reduce the risk of electric shock, do not touch the icemaker power switch or
control switch with damp hands.
• Before Servicing: Move the icemaker's power switch to the "OFF" position. Turn
off the power supply. Place the disconnect (if applicable) in the off position.
Lockout/Tagout to prevent the power supply from being turned back on
inadvertently.
• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after any maintenance is done to the appliance. Make sure that
none have fallen into the dispenser unit/ice storage bin.
Spout-to-Chute Strap
Spout
Thumbscrews
Spout-to-Chute Strap
Float Switch
Evaporator Packing
(F-450 Only)
Rubber O-Ring
(FD-650 and Larger)
Nylon Ring
(FD-650 and Larger)
Evaporator
Condensate
Drain Pan
Evaporator
Assembly
Spout
Reservoir
Cover
Infrared Sensor Lens
WARNING
Wing Nuts
Spout-to-Chute Packing
Spout-to-Chute Bracket
Shaft
Baffles
Reservoir
Overflow Hose
Reservoir Hose
Cutter
Extruding
Head
Chute
Model Shown: F-1002MAJ-C
Fig. 18
42
Plate
Proximity Switch
(mechanical bin control)
Bin Control Assembly Mount
Actuator
Chute Insulation
Packing and
Nylon Ring