III. Maintenance
The appliance must be maintained in accordance with the instruction manual and labels
provided. Consult with your local Hoshizaki Certified Service Representative about
maintenance service.
• Only qualified service technicians should service the appliance.
• To reduce the risk of electric shock, do not touch the icemaker power switch or
control switch with damp hands.
• Before Servicing: Move the icemaker's power switch to the "OFF" position. Turn off
the power supply. Place the disconnect (if applicable) in the off position.
Lockout/Tagout to prevent the power supply from being turned back on
inadvertently.
• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after any maintenance is done to the appliance. Make sure that
none have fallen into the dispenser unit/ice storage bin.
Spout-to-Chute
Spout
Strap
Float Switch
Reservoir
Cover
Evaporator Packing
(F-450 Only)
Rubber O-Ring
(FD-650 and Larger)
Nylon Ring
(FD-650 and Larger)
Evaporator
Condensate
Drain Pan
Evaporator
Assembly
Infrared Sensor Lens
WARNING
Spout-to-Chute Packing
Spout-to-Chute Bracket
(F/FD-1002 and Smaller)
Drip Guide
(F-1501 and Larger)
Reservoir
Overflow Hose
Reservoir Hose
Cutter
Extruding
Head
Model Shown: F-1501MAJ-C
Fig. 20
43
Chute
Chute Insulation
Packing
Ties
(Hook and Loop)