Hoshizaki KMD-410MAH Instruction Manual page 20

Discharge
Hose
16) Replace the front panel in its correct position and turn on the power supply for 2
minutes.
17) Turn off the power supply and remove the front panel.
18) Move the control switch to the "ICE" position.
19) Replace the front panel in its correct position.
20) Turn on the power supply to fill the water tank with water.
Snapping Tab
Pump Motor Bracket
Fig. 8
Cube Guide
Fig. 9
17
Float Switch
Connector
Pump Motor
Connector
Thumbscrews
Pump Motor
Float Switch