Notification Bar; Status Icons - Honeywell MX9 User Manual

When the MX9 is locked, tapping on Unlock at the bottom of the screen unlocks the MX9. Depending on the settings, a
password may be required. The MX9 can also be configured to lock after a period of inactivity. For more information, see
the Lock settings later in this section.

Notification Bar

The Notification Bar is displayed at the top of the Today screen. The notification bar remains visible even when other
screens are selected, though the icons displayed may vary.
When the Notification bar is displayed on other screens there may be an X (close the current screen/program) or an ok
(accept the current input and close the screen).
Category Icon
Network
Network
Network
Network
Network
Volume
Volume
Volume
Power
Power

Status Icons

Additional icons may be displayed at the lower edge of the Today screen.
Note: Summit signal strength icons are displayed only when the Summit Client Utility is controlling the radio.
Icon Function
Bluetooth module is connected to one or more of the targeted Bluetooth device(s).
MX9 is not connected to any Bluetooth device.
MX9 is ready to connect with any Bluetooth device.
MX9 is out of range of all paired Bluetooth device(s). Connection is inactive.
Summit radio is not currently associated or authenticated to an Access Point.
The signal strength for the currently associated/authenticated Access Point is less than -90 dBm
The signal strength for the currently associated/authenticated Access Point is -71 dBm to -90 dBm
The signal strength for the currently associated/authenticated Access Point is -51 dBm to -70 dBm
The signal strength for the currently associated/authenticated Access Point is greater than -50 dBm
5 - 4
Function
The Windows Mobile Wireless Manager is managing the wireless connection and the MX9 is
connected to a wireless network.
A wireless manager is managing the wireless connection.
A wireless manager is managing the wireless connection and has detected one or more wireless
networks in range.
A wireless manager is managing the wireless connection and has not detected a wireless network
in range.
The Wireless Wide Area Network is connected to a cellular network.
The speaker is on.
The speaker is off.
Vibrate is on.
The MX9 is connected to external power.
The MX9 is operating on battery power. The strength of the battery is indicated by the number of
bars displayed: 0 (low battery) to 4 (fully charged battery).