Wan - Honeywell MX9 User Manual

WAN

These panels can be used to set the parameters for the wireless Wide Area Network (WAN) on the MX9. The WAN is a
form of wireless network that utilizes a cellular network instead of the spread spectrum network most used by wireless
Local Area Networks (LAN).
Setting
Connection tab
Status
Connect button
Admin Login button
Network tab
Phone, Username, Password, APN
TCP/IP tab
DHCP
DNS
Addresses
Autoconnect tab
Automatically connect - turned On
Automatically reconnect
Admin tab
Admin Factory Default Password
Enable Radio button
PIN (Personal Identification Number)
PUK (Personal Unblocking Key)
Default
Not Connected
Dimmed
Enabled
Blank
Enabled, dimmed
Enabled, dimmed
Pre-populated, dimmed
Disabled, dimmed
Enabled, dimmed
LXEWWAN
Dimmed
Enabled, Blank
Disabled, Dimmed
5 - 57