Honeywell MX9 User Manual page 148

Option
Internet
Launch Button
Global Key
Global Delay
Input Panel
Clear Button
Scroll Buttons
6 - 6
Explanation
Default is Disabled. Enable the Internet checkbox to use the End-user Internet Explorer
(EUIE.EXE) When the checkbox is enabled, the Internet Menu and Internet Status are available.
See the section titled End User Internet Explorer (EUIE)
See following section titled
Default is Ctrl+Spc. Select the Global Key key sequence the end-user is to press when
switching between applications. The Global Key default key sequence must be defined by the
AppLock Administrator. The Global key is presented to the end-user as the Activation key.
Default is 10 seconds. Enter the number of seconds that Applications must wait before starting
to run after reboot.
Note: Delay (Global) may not be available in all versions of AppLock. You can simulate a Global
Delay function by setting a delay for the first application (lowest Order) launched and
setting the delay to 0 for all other applications.
Default is Disabled. Enable (check) to show the Keyboard option on the Switchpad menu. When
enabled the input panel cannot be enabled or disabled for each individual application, and is
available to the user for all configured applications.
Tap the Clear button to clear all currently displayed Filename or Application information. The
Global settings are not cleared.
Use the left and right scroll buttons to move from application setup screen to application setup
screen. The left and right buttons update the information on the screen with the previous or next
configured application respectively.
Launch Button (page 6-7).
(page 6-4) for more details.