Install Hsm Connect; Using Hsm Connect - Honeywell MX9 User Manual

Install HSM Connect

1. The HSM Connect installation file is on the Getting Started Disc.
2. Download the files to a location on your host PC hard drive.
3. Execute the setup file that was copied to the host PC. This setup program installs the HSM Connect utility.
4. Follow the on screen installation prompts.
5. When the installation is complete, create a desktop shortcut to HSM Connect.
6. HSM Connect is now installed on the host PC and ready to use.

Using HSM Connect

1. Power up the MX9.
2. Connect the MX9 to the host PC using the USB connection cable. Once connected, the ActiveSync dialog box
appears and the ActiveSync connection is automatically established.
3. Select "No" for partnership when prompted. Dismiss any ActiveSync dialog boxes warning a partnership is not set
up. It is not necessary to establish a partnership to use HSM Connect. However, if a partnership is desired for other
reasons, one may be established now.
4. Double-tap the HSM Connect icon that was created on the PC desktop.
5. HSM Connect launches.
5 - 87