Honeywell MX9 User Manual page 137

1. Configure the radio.
2. Enter the name of the computer to which you want to connect. If needed, enter the port number at the end of the
computer name (remotecomputername:portnumber).
3. Enter the user name, password and domain.
4. Tap the Save password check box if it is blank.
5. Tap Connect to complete the connection and save the password.
6. Select Disconnect from Remote Desktop connection.
7. Create a folder titled Startup under the System folder.
8. Copy Remote.exe from the Windows folder to the \System\Startup folder just created.
9. Select Start > Settings > System > MX9WM Options and tap Remote Desktop Autologon.
10. Select OK and yes to reboot.
11. Result: The unit will boot into the Remote Desktop Connection.
5 - 83