Discovering; Stop Button; Bluetooth Device List - Honeywell MX9 User Manual

Discovering

1. Tap the Discover button to locate all discoverable Bluetooth devices in the vicinity. The Discovery process also que-
ries for the unique identifier of each device discovered.
2. Tap Stop at any time to end the Discover and Query for Unique Identifier functions.
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the MX9 Bluetooth scanning range,
the Bluetooth connection between the paired device and the MX9 is lost. There may be audible or visual signals
as paired devices disconnect from the MX9.

Stop Button

Tap Stop at any time to end the Discover and Query for Unique Identifier functions. Devices not paired are not shown after
any reboot sequence.

Bluetooth Device List

The discovered paired devices may or may not be identified with an icon. Discovered devices without an icon can be
paired as a Serial device, Scanner, or a Printer. The Bluetooth panel assigns an icon to the device name.
7 - 5