Panasonic DF–1100
4.6.4 Transmission Problems
START
Does the ID display?
Yes
Does the Verification Stamp
operate?
Yes
Is the copy quality OK?
Yes
Any other problems?
No
END
4–40
No
1. No ID function at the remote unit.
2. The ID is not set for the remote unit.
No
1. Set "STAMP=ON"
2. Check CN10 (FCB PCB).
3. Replace the Stamp Solenoid.
4. Replace the FCB PCB.
No
Make a copy and refer to Sect. 4.4.16
Yes
See Sect. 4.3 (Troubleshooting using
information codes).