Basic Copying
Copy Density
AES
Lighter
Manual Density
Use the manual copy density mode to adjust exposure (density) when
originals are too light or too dark. Manual adjustments can be made in
seven levels.
LIGHTER
NORMAL
DARKER
COPY DENSITY
NOTE: Both AES and manual copy density settings may can be changed during
copying.
Normal
Darker
START PRINT
Automatic Exposure Selection
(AES) detects the density of the
original and automatically selects
the appropriate density for
copying. AES is the initial setting.
1 Place originals FACE DOWN
on platen glass or ADF.
2 Press Copy Density arrows to
select desired density.
Press: [ ] to make lighter
[ ] to make darker
3 Press
START PRINT
.
Basic Copying 5-5