Setting Fold Erasure - Konica Minolta 1216 User Manual

Special Copying
Frame and Fold Erasure (continued)

Setting Fold Erasure

Set Fold Erasure when using Frame Erasure to eliminate the black
copy marks along center strip. Refer to page 7-4 for instructions on
using Frame and/or Fold Erasure.
FOLD MEASUREMENT: 10mm/20mm/30mm
Light
FOLD
ERASURE
FRAME
1 2 3
4 5 6
7 8 9
P 0
RECALL STOP/CLEAR
Fold measurement
NOTE: The fold setting will remain valid until it is changed.
7-6 Special Copying
Flash
FOLD
ERASURE
FRAME
P
P
1 Press
ERASURE
Erasure.
2 While pressing
, then press
ERASURE
again. The Fold light will flash,
and the current Fold
measurement will be displayed
in the print quantity window.
3 Use keypad to enter a Frame
measurement (10mm, 20mm,
30mm).
Press: [1][0] for 10mm
[2][0] for 20mm
[3][0] for 30mm
The Fold measurement is
displayed in the print quantity
window.
4 Press [P] to store the Fold
measurement. The Fold light
will be still, and the initial print
quantity will be displayed.
Fold Erasure eliminates black
copy marks along borders.
to select Fold
, press
[P]
[P]