Adjusting The Basic Position Of The Clutch Lever - KTM 2011 990 Supermoto R USA Owner's Manual

SERVICE WORK ON THE CHASSIS

Adjusting the basic position of the clutch lever

10.16
Info
Turn the adjusting screw clockwise to increase the distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
–
Check the chain sliding guard for wear.
» If the chain sliding guard is worn:
–
Change the chain sliding guard.
–
Check the chain sliding guard for tightness.
» If the chain sliding guard is loose:
–
Tighten the chain sliding guard.
Guideline
Screw, chain sliding
B00113-11
guard
Screw, chain sliding
guard
x
M5 5 Nm
(3.7 lbf ft)
M6 6 Nm
(4.4 lbf ft)
92
–
Loctite ® 243™