KTM 2011 990 Supermoto R USA Owner's Manual page 75

TUNING THE CHASSIS
–
Turn adjusting screws
Info
The adjusting screws are located at the top end of the fork legs.
Make the same adjustment on both fork legs.
–
Turn back counterclockwise by the number of turns corresponding to the fork type.
Guideline
Spring preload - Preload Adjuster
101117-10
Comfort
Standard
Sport
Full payload
Info
Turn clockwise to increase preload, turn counterclockwise to reduce spring
preload.
Changing the spring preload has no influence on the rebound damping although
the adjusting screws turn during the adjustment work. However, you should also
adjust the rebound damping when you alter the spring preload.
clockwise until they stop.

5 turns
5 turns
3 turns
3 turns
73