Checking The Headlight Setting - KTM 2011 990 Supermoto R USA Owner's Manual

ELECTRICAL SYSTEM

Checking the headlight setting

13.12
A 0 0 A
–
Position the cover.
–
Mount and tighten screws
–
Check that the license plate lamp is functioning properly.
700602-01
–
Park the vehicle on a horizontal surface in front of a light-colored wall and make a mark
at the level of the center of the headlight.
–
Make another mark at a distance of
Guideline
Distance
B 0 0 B

–
Park the vehicle at a distance of
beam headlight.
Guideline
400726-10
Distance

–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
.

under the first mark.

5 cm (2 in)
vertically in front of the wall and switch on the low

5 m (16 ft)
137