ELECTRICAL SYSTEM
–
Turn bulb socket
–
Push the bulb carefully into the socket, turn it counterclockwise and pull it out of the
socket.
–
Press the new bulb carefully into the socket and turn it clockwise until it stops.
Brake light (P21W/socket BA15s) (
–
Insert the bulb socket into the tail light and turn clockwise until it stops.
–
Check that the brake light system is functioning properly.
101151-10
–
Position the rear top part.
–
Mount and tighten screws
Guideline
Remaining chassis screws
101150-10
counterclockwise all the way and take it out of the tail light.
p. 187)
.
M6
130
10 Nm (7.4 lbf ft)