Adjusting The Ignition Curve To The Fuel Quality; Checking The Basic Position Of The Shift Lever - KTM 2011 990 Supermoto R USA Owner's Manual

TUNING THE ENGINE

Adjusting the ignition curve to the fuel quality

15.4
–
Switch off the ignition by turning the ignition key to the OFF
–
Remove the seat. ( p. 81)
To activate the ignition curve for low octane fuel:
Note
Engine damage Low-quality fuel damages the engine.
–
Operate the vehicle with fuel with an octane rating below 95 (ROZ 95 / RON 95 / PON 91) for no more than one tank full.
–
The ignition curve must be adjusted to low octane fuel.
–
Disconnect plug-in connector.
Plug-in connector disconnected – Fuel with an octane rating of 80 to 94 (RON) can be used for one tank full. (
Activate the ignition curve for fuel with an octane rating of 95 or higher (ROZ 95/RON 95/PON 91):
–
Connect plug-in connector.
Plug-in connector connected – Fuel with an octane rating of 95 or higher can be used. (
–
Mount the seat. ( p. 82)

Checking the basic position of the shift lever

15.5
0 0 0 A A
–
Sit on the vehicle in the riding position and determine the distance
upper edge of your boot and the shift lever.
Distance between shift lever and upper
edge of boot
» If the distance does not meet specifications:
–
Adjust the basic position of the shift lever.
400692-10
position.
p. 152)
between the

10... 20 mm (0.39... 0.79 in)
x ( p. 154)
153
p. 152)