KTM 2011 990 Supermoto R USA Owner's Manual page 166

CLEANING, CARE
–
After the motorcycle has been thoroughly cleaned with a gentle jet of water, it should
be dried with compressed air and a cloth.
Warning
Danger of accidents Reduced braking efficiency due to wet or dirty brakes.
–
Clean or dry dirty or wet brakes by riding and braking gently.
–
After cleaning, ride the vehicle a short distance until the engine warms up, applying the
brakes occasionally.
Info
The heat produced causes water at inaccessible positions in the engine and on
the brakes to evaporate.
–
After the motorcycle has cooled off, lubricate all moving parts and bearings.
–
Clean the chain. ( p. 86)
–
Treat bare metal parts (except for brake discs and exhaust system) with anti-corrosion
materials.
Cleaning and preserving materials for metal, rubber and plastic (
–
Treat all painted parts with a mild paint polish.
High-luster polish for paint (
–
Oil the ignition/steering lock, tank lock, and seat lock.
Universal oil spray ( p. 199)
p. 198)
164
p. 198)