Mounting The Seat; Mounting The Helmet Lock On The Vehicle - KTM 2011 990 Supermoto R USA Owner's Manual

SERVICE WORK ON THE CHASSIS

Mounting the seat

10.7

Mounting the helmet lock on the vehicle

10.8
Warning
Danger of accidents Impairment of ride behavior and vehicle operation if a helmet or helmet lock is attached to the vehicle.
–
Do not use the helmet lock for holding a helmet or other objects during the journey. Always remove the helmet lock before start-
ing out.
–
Position front recesses
the rear and simultaneously push it forward. Both lugs
locking bolt
The seat engages with an audible click.
–
Finally, check that the seat is correctly mounted.
101139-10
–
Remove the seat. (
–
Position the steel cable from the tool set with one loop on the lug
Steel cable (60012015000)
–
Guide the steel cable through the helmet opening.
–
Then position the free loop of the steel cable on the lug.
–
Position the helmet carefully on the side of the vehicle.
–
Mount the seat. (
101140-10
of the seat on the oval head screws of the fuel tank, lower

must be inserted into the lock housing.

p. 81)
p. 82)
must hook into the frame and

.

82