Connector Pinout - Derbi Rambla 250 Manual

Electrical system
2. If the tank is emptied with the engine off (with an external pump), when the vehicle is started, the
gauge shows the fuel level in the tank before the emptying. In this case, also wait 80 seconds to read
the true level.
This happens because the multifunction digital computer has saved in its memory the fuel level in the
tank at the moment the key was turned to ''OFF''; when the battery is first attached, there is no level
stored in the memory and the tank is emptied by means of an external pump, the computer is not able
to detect it.
Connectors
Dashboard
PINOUT
The connector diagram seen on the instrument
panel and the relevant pinout are shown in the fig-
ure.
The numbers are also stamped on the plastic part
of the connectors and also on the connector body.
KEY:
A: Black
B: Grey
1
2
3 Speed sensor power supply
4
5
6
7
8
9 Function grounding (optional)
10 Function grounding (optional)
11
12
13
14
15
16
17
18
19 Water Temperature Sensor
20
ELE SYS - 72

CONNECTOR PINOUT

Specification
Key Positive
Right indicator input
RPM
Speed sensor ground lead
General grounding
Neutral input
Function grounding
Battery Positive
Left indicator input
High-beam lights input
Speed sensor input
EFI input
K Line
Oil pressure sensor
Fuel Level Sensor
Mode
Desc./Quantity